Very precise and robust
Permanent run-out- and repeat accuracy of less than 0.003 mm
This assures best surface results due to a uniform cutting action and highest reproducibility.
Your advantage: safe and precise machining.
High radial rigidity for a better part geometry accuracy
The optimum radial rigidity resulting from a robust toolholder body, avoids lateral deflection during metal cutting.
Your advantage: high part accuracy geometry at the workpiece and the highest material removal rates (e.g. 400 cm3/min at 42crmo4*).
* depending on the machine tool and the tool
High torque of up to
Due to the compact design, holding forces and a high torque transmission are guaranteed.
900 Nm* (Ø 20) and 2000 Nm (Ø 32 mm) for highest volume machining
Your benefit: highest material removal rate.
* at Ø 20 mm under ideal conditions, typical value at 520 Nm.