No product detail page could be found for this serial number. If you should have any questions about the product, you can search for the material number in the search field or contact us.
How can we help you?
Your request to SCHUNK
Find field sales representatives
Newsletter registration
Request CAD data
Your quote request
Change the country selection to see information on the products, services and contact persons that are relevant for your location.
Face mill arbors are suitable for clamping end face mills and face mills, with crosswise slot in accordance with DIN 1880, from clamping diameter 40 mm in accordance with DIN 2079 (four threaded holes). Due to the enlarged contact surface, milling cutters with a crosswise slot can be clamped quickly. The clamping screw and driving keys are included in the scope of delivery. Face mill arbors with front side coolant supply are suitable for clamping end face mills and face mills with internal cooling. Face mill arbors with simultaneous taper and flat work surface close the interface-related gap between tool flange and the front of the machine spindle with the interface of the flat work surface.
Face mill arbors are suitable for clamping end face mills and face mills, with crosswise slot in accordance with DIN 1880, from clamping diameter 40 mm in accordance with DIN 2079 (four threaded holes). Due to the enlarged contact surface, milling cutters with a crosswise slot can be clamped quickly. The clamping screw and driving keys are included in the scope of delivery. Face mill arbors with front side coolant supply are suitable for clamping end face mills and face mills with internal cooling. Face mill arbors with simultaneous taper and flat work surface close the interface-related gap between tool flange and the front of the machine spindle with the interface of the flat work surface.
